Autel Maxiscan MS300 OBD2 Code Reader

Determine the exact fault within your car in a matter of seconds !

This is  a simple to use OBD2 car diagnostic scanning tool that will work with any 1996 and newer vehicle that is OBD II  compliant (including CAN, VPW, PWM, ISO and KWP2000 protocols).

To determine if your specific vehicle is OBD2 compliant have a search on Google or try and locate a socket within your car as shown in the image below (these sockets are ‘normally’ located somewhere near the fuse box) :

OBD-II Protocols Supported :

SAE J1850 - PWM
SAE J1850 - VPW
ISO9141-2
ISO14230-4 - KWP2000
ISO15765-4
SAEJ2480
Controller Area Network - CAN

Features :

* Works with all 1996 and newer vehicles that are OBD II compliant (including CAN).
* Read and erase generic and manufacturer specific Diagnostic Trouble Codes (DTC).
* Turn off 'check engine' light (MIL).
* Reset OBD II monitor status.
* Supports multiple trouble code requests: generic codes, pending codes and manufacturer specific codes.
* Review the emission readiness status of OBD monitors.
* Determine the malfunction indicator lamp (MIL) status.
* Retrieve VIN (Vehicle Identification No.) on 2002 and newer vehicles that support Mode 9.
* Totally portable & simple to use.
* A computer is not required for operation.
* Free CD software with over 8000 DTC definitions.
* No batteries required - The unit is powered via the ODB II socket.

Specifications :

* Display: 2-Line Backlit LCD Screen.
* Operating Temperature: 0 to 50 C (32 to 122 F).
* Storage Temperature: -20 to 70 C (-4 to 158 F).
* Colour may vary.

Included :

* 1 x Scanner Unit
* 1 x User Manual. Including 1000 x printed generic OBD2 DTC’s for quick reference.
* 1 x CD. Including DTC software with 8000 generic and manufacturer specific DTC’s.

Most garages charge £20 upwards to simply read the fault codes and let you know what the problem is. With this unit you can find out yourself and then go on to fix and reset / erase the error ... as well as being able to do much more time & time again !